Frequently Asked Questions
​
How do I reset a tripped circuit?
If a circuit is tripped, you will need to locate your breaker panel. You will need to identify the tripped breaker by looking to the one that is neither in the "ON" or "OFF" position. You can also identify it quickly by looking for the orange or red one. Push the the switch to the "OFF" position and then back to the "ON" position. The breaker should now be aligned with all the rest of the breakers on your panel. Check to see if it is working. If you are unable to reset the circuit breaker, call to prevent further damage.
​
Why does my circuit always trip?
​
A circuit that continuously trips might have too may devices running on the same circuit or it could be a faulty shout.
​
Why are my lights flickering?
​
Outdated wiring was not designed to handle the electrical capacity of modern technology. It could become a electrical fire hazard. This can be noticeable when major appliances turn off and on. You may need a electrical upgrade.
​
What is a GFCI?
​
GFCI is a Ground Fault Circuit Interrupter. It's used to measure the resistance on the positive and negative electrical loads that are connected to it. They are usually located in areas that are near water like the kitchen and bathroom. It will detect any unsafe levels of electrical current and should cause it to trip. This helps to protect you from electrical shock.
​
What causes electrical fires?
​
Most electrical fires are caused by faulty electrical outlets and old, outdated appliances. Other fires are started by faults in appliance cords, receptacles and switches. ... Removing the grounding plug from a cord so it can be used in a two-prong electrical outlet can also cause a fire. Upgrading your electrical equipment on older homes and having an electrical inspection can help to prevent electrical fires.
​
How can I lower my electric bill?
​
Your furnace, AC, and water heater usually use most of your homes energy. Having them all as efficient as possible can help to reduce your bill. Always try to turn off any electrical devices when not in use.
Is it possible to replace my light with a ceiling fan?
​
Yes. You just need to be sure the box is braced and rated for the weight and torque of the fan you would like to install.
​
Do I need an electrical inspection?
​
Older home are often not up to date with current Code requirements. We often look for aging wires, faulty panels, and weak or broken electrical connections. You should call for an inspection if you are living in an older home, moving into a new property, planning renovations or addition, or haven't had an inspection in the last 5-10 years.
​